Social Icons

Pages

dimanche 10 janvier 2016

The Process Of Getting Reclaimed Refrigerant

By David Howard


The introduction of science and technology into the community has been one of most remarkable evolutionary moves in recent times. This changed human civilization on quite a number of levels both socially and economically as well. Machines and other fruits of modernity have become an inevitable part of human daily life. There is a machine for each and every aspect of human life. The process of getting reclaimed refrigerant is very crucial in food preservation.

Controlling temperature in a place effectively is not an easy thing. It requires some special properties that can only be attained when using cooling agents such as coolants. Fridges, freezers, air conditioners and several other devices have been known to contain samples of condensed gas. The ability of a freezer to maintain minimal temperatures irrespective of environmental aspects makes it a very effective food preservation mechanism.

A refrigerant is a gas that contained properly and installed in these temperature regulating devices. When contained properly, this gas is very uses to the people. If it leaks into the atmosphere however, it could cause so much damage to the ozone layer and hence bring about accelerated global warming tendencies. Following the Montreal protocol, reclamation of this gas is done in order to conserve this unique resource and recycle it elsewhere.

Measures have been put in place to ensure that the refrigerant used in these devices is reclaimed and recycled for use in other devices instead of being disposed off into nature. The pressure at which this gas is stored makes it a very delicate matter to handle. This duty is therefore reserved for only well trained professionals with the knowledge and skills required. The reclaimer will require hoses, manifolds and a strategically sized recovery machine for the procedure.

The containment for this versatile gas is usually equipped with several valves. These valve cores are used to control emission from the access points. The person should carefully remove these from the access points. This will allow the gas that is currently in liquid form to flow onto the hoses. This hose must be able to handle both liquid and gas form coolant.

It is advised to use a multipurpose hose for the containment part. The air conditioner can then be allowed to tap into the flow for continuity purposes. This creates a unique situation with two varying pressure points. A liquid at one end and gas in other, the manifold is designed to simulate an equilibrium between the two and inhibit and probable reactions.

The high pressure containment can create quite a large amount of heat in system. It is therefore very important that heat mitigation maneuvers are undertaken during the recovery procedure. In this bid, the cylinder and recovery machines owe to sheltered properly. Cooling fans can also provide a wonderful heat elimination mechanism.

During this procedure so much can do wrong and cause damages. It is wise that the technician uses protective gear for this activity. Another sensitive part of the procedure is the refilling of the cylinder with the gas. This process must be accurately controlled otherwise explosive reactions will be experienced. A calibrated measurement procedure is a better option as opposed to tank overflow devices.




About the Author:



Aucun commentaire:

Enregistrer un commentaire

 

Sample text

Sample Text

Sample Text

 
Blogger Templates