Now, there is a new way of cleaning which is effective and does not have any adverse effects to the environment. You can use this for industrial purposes. You may use this to remove paint and any other unwanted things on surfaces, equipment and other materials.
This new technology is often compared to conventional technologies. You can call this as sponge blasting. With this technology you can use various stuff available to remove dirt. It has less pollution and waste being generated. It is also safer and much easier to use.
It utilizes an air propelled and water based polyurethane foam when cleaning. This improves the performance of cleaning dirt in the process. There are a lot of kinds of foam one could pick based on whatever materials is used.
One could check on red media. This one is made of steel grit abrasive. It is the best choice to remove the some thick and heavy coatings. You could also pick the silver media. This one is made of aluminum oxide abrasives. This could be used whenever you are going to be removing some paint and coatings. One can use it to polish surfaces that will be used on industries.
They also have the brown media. This is from the Starblast abrasives. If you are going to clean light rust or cracked and peeling paint, you can have this one. You could also have the white media. It has an abrasive from plastic. The white one is for removing graffiti from buildings and coatings on tiles. They also have the green media. Its abrasive are very mild. This is good to clean grease and oil from machinery. This is also good for parts which one could hardly reach.
Aside from all of those varieties, this system is also using a unit that allows the media to reach the surfaces which are being cleaned. The unit it has also have a classifier which collects the sponge and runs that through its sifter. The sifter it has is powered by electricity. The sifter will be the one responsible from separating things into different kinds. It will be separated into oversized debris. There will also be a kind for those who will be reusable. There will be those who are the materials spent in blasting and the dust that accumulates.
For things which would not have so much accumulated dust, the materials will be recycled many times using the classifier that the system has. There are those that can be applied for more than ten times or until the material could not be recycled anymore. The number of times it can be recycled depend on the type of surface you are cleaning and the dirt being removed from that surface.
If one could reuse those stuff over and over again, there will be an increase in productivity. It will also reduce the cost on buying it again. Since it is being reused, there will be minimal waste left afterward.
Picking this as a cleaning procedure could offer the user so many good results. This is really safe for our environment and produces less waste. One could call for this service as soon as possible.
This new technology is often compared to conventional technologies. You can call this as sponge blasting. With this technology you can use various stuff available to remove dirt. It has less pollution and waste being generated. It is also safer and much easier to use.
It utilizes an air propelled and water based polyurethane foam when cleaning. This improves the performance of cleaning dirt in the process. There are a lot of kinds of foam one could pick based on whatever materials is used.
One could check on red media. This one is made of steel grit abrasive. It is the best choice to remove the some thick and heavy coatings. You could also pick the silver media. This one is made of aluminum oxide abrasives. This could be used whenever you are going to be removing some paint and coatings. One can use it to polish surfaces that will be used on industries.
They also have the brown media. This is from the Starblast abrasives. If you are going to clean light rust or cracked and peeling paint, you can have this one. You could also have the white media. It has an abrasive from plastic. The white one is for removing graffiti from buildings and coatings on tiles. They also have the green media. Its abrasive are very mild. This is good to clean grease and oil from machinery. This is also good for parts which one could hardly reach.
Aside from all of those varieties, this system is also using a unit that allows the media to reach the surfaces which are being cleaned. The unit it has also have a classifier which collects the sponge and runs that through its sifter. The sifter it has is powered by electricity. The sifter will be the one responsible from separating things into different kinds. It will be separated into oversized debris. There will also be a kind for those who will be reusable. There will be those who are the materials spent in blasting and the dust that accumulates.
For things which would not have so much accumulated dust, the materials will be recycled many times using the classifier that the system has. There are those that can be applied for more than ten times or until the material could not be recycled anymore. The number of times it can be recycled depend on the type of surface you are cleaning and the dirt being removed from that surface.
If one could reuse those stuff over and over again, there will be an increase in productivity. It will also reduce the cost on buying it again. Since it is being reused, there will be minimal waste left afterward.
Picking this as a cleaning procedure could offer the user so many good results. This is really safe for our environment and produces less waste. One could call for this service as soon as possible.
About the Author:
When you are looking for information about sponge blasting, pay a visit to our website here today. You can see details at http://www.anconstructioninc.net now.
Aucun commentaire:
Enregistrer un commentaire